Home

Water Meters

Elster S130 Hot and Cold Water Meter

The S130 single-jet meter operates on the velocity principle where a jet of water enters the measuring chamber and drives the rotor. The velocity of the rotor is proportional to the flow. Available in sizes 15mm and 20mm, with nominal flow rates of Qn 1.5m³/h and Qn 2.5m³/h.

  • The meter has a vacuum sealed dry register
  • Robust stamped copper alloy body to ensure meter resistance to corrosion
  • Sealed external calibration screw for ease of regulation
  • Opaque lid for shock and atmospheric protection
  • The magnetic drive is unaffected by external magnetic interference
  • The register is resistant against dust and condensation
  • Conforms to ISO 4064 Class B
  • Warm water versions are available
  • Pulse output available providing access to management information
  • Operating temperature for warm water of 90 C
  • Maximum working pressure of 16 bar

MSI offer these Elster Water Meter in available models: Hot S130 3/4" and Cold S130 3/4"

Elster S130 3/4" COLD water meter datasheet - Download (PDF) 

Elster S130 3/4" HOT water meter datasheet - Download (PDF) 

 


 

Elster C700 Water Meter

The C700 oscillating piston type water meters are the most advanced design positive displacement meters available. Boasting dependability and engineering excellence, the C700 line carries the industry's longest and broadest product warranty, assuring your utility of unparalleled performance and the highest revenue.

The C700's uniquely designed chambers, with dual-stage pistons, are custom engineered for performance exceeding applicable AWWA standards. Nylon materials are selected for strategically placed wear areas, providing long life and reduced noise.

The complete family of top-performing C700 meters includes sizes 5/8" to 2" offered with a variety of material configurations and registers, including a choice of water works or NSF-61 certified bronze main cases.

  • High accuracy advanced design
  • Longest and broadest warranty
  • Available with pulse generator, absolute encoder or digital output registers
  • low-lead or waterworks bronze

MSI offers these Elster Water Meters in available models: C700 1" and C700 3/4"

Elster C700 3/4" datasheet - Download (PDF)

Elster C700 1" datasheet - Download (PDF)

 


 

Jerman DLJ100 Cold Water Meter

The DLJ100 is a 1" cold water meter with 1" Male NPT couplings.   Ideal for 1/2-50GPM flow rates on 1" cold water lines.  Can be adapteed to 1 1/4" water lines for residential well measurement applications.

  • Accuracy  within 1-1/2% - Proven Multi-Jet Water Meter Design
  • Dry Dial won't discolor or fade- hermetically sealed from the elements
  • Tempered Glass Lens for continued readability
  • Magnetic Drive - water is sealed from entering register
  • Large Pointer on Dial for indication by 1/10 of a gallon
  • Low flow indicator for flow rates down to almost drop by drop
  • Odometer type totalizer to 9,999,999 gallons on our small meters
  • Frost Resistant Bronze Body - forged for strength and pinhole avoidance
  • Sealed Regulator port - preset for accuracy at factory
  • Each meter marked with year of manufacture and serial number
  • Integral Strainer in register chamber
  • Flow Rates in accordance with US Industry Standards and AWWA C708
  • All sizes fit standard meter couplings or flanges
  • Can be installed horizontally or vertically

MSI offers these Elster Water Meters in available models: DLJ100 1" 

DLJ100 1" COLD water meter datasheet - Download (PDF) 

 


 

Master Meter - Flexible Axis Meter (FAM)

The Master Meter flexible axis meter (FAM).  FAM flow tubes can be installed horizontally, MM-FAM.PNGvertically, or any angle in between.  No mater where it ends up, the FAM measuring chamber remains horizontal for accurate -- and quiet --operation.  It can also be positioned so it is always facing up for easy reading.

To further simplify installation and reduce costs, FAM flow tubes can use standard meter couplings or solder-joint connections.  And all Master Meter flexible axis meters are AMR compatible.

Master Meter FAM datasheet - Download (PDF)

 


 

Jerman DLJ150 and DLJ200 Cold Water Meter

The DLJ150 and DLJ200 are multijet (inferential) impeller meters.  The impeeller and magnet are the only moving parts in the measuring chamber. The chamber is located in a strainer basket, which allows for high amounts of impurities to be passed through the meter without affecting operation.  The impeller movement is transferred by a magnetic coupling to the hermetically sealed register.

  • Accuracy  within 1-1/2% - Proven Multi-Jet Water Meter Design
  • Dry Dial won't discolor or fade- hermetically sealed from the elements
  • Tempered Glass Lens for continued readability
  • Magnetic Drive - water is sealed from entering register
  • Large Pointer on Dial for indication by 1/10 of a gallon
  • Low flow indicator for flow rates down to almost drop by drop
  • Odometer type totalizer to 9,999,999 gallons on our small meters
  • Frost Resistant Bronze Body - forged for strength and pinhole avoidance
  • Sealed Regulator port - preset for accuracy at factory
  • Each meter marked with year of manufacture and serial number
  • Integral Strainer in register chamber
  • Flow Rates in accordance with US Industry Standards and AWWA C708
  • All sizes fit standard meter couplings or flanges
  • Can be installed horizontally or vertically

MSI offers these Elster Water Meters in available models: DLJ150 1 1/2" and DLJ200 2" 

DLJ150 1 1/2" and DLJ200 2" COLD water meter datasheet - Download (PDF) 


 


Search on MSI Site
Equipment Financing
In Partnership with
Crest Capital Equipment Leasing
Member Login